MDF Baseboards
MDF baseboards are the Portland-area standard for painted trim: dead-straight lengths, no grain telegraphing through paint, and a consistently smooth paint-ready face.
Professional MDF and wood baseboard installation for remodeling projects, home renovations, and new construction. Precision craftsmanship with clean, paint-ready finishes.

As a baseboard contractor in Portland, we install every common profile and material—matched to your floors, your walls and the way the room will be painted.
MDF baseboards are the Portland-area standard for painted trim: dead-straight lengths, no grain telegraphing through paint, and a consistently smooth paint-ready face.
Factory-primed profiles installed, filled and caulked so your painter only needs finish coats—faster schedule, cleaner result.
Solid wood baseboards for stain-grade work and older Portland homes, cut and fit so grain and joints read as one continuous run.
Tall, flat, square-edge profiles for contemporary remodels—crisp shadow lines with tight scribes at uneven walls and floors.
Colonial, ogee and stepped profiles coped at inside corners so the detail flows around the room without gaps.
Custom interior trim installation—built-up base, shoe molding, door casing and transitions matched to your existing millwork.
Trim installation in Portland homes is rarely a matter of straight cuts. Walls bow, floors slope and corners are almost never a true 90 degrees. Our finish carpentry approach starts with measuring the real room: inside corners are coped so seasonal movement never opens a visible gap, outside corners get precise miter cuts dialed in to the actual angle, and long runs are joined with glued scarf joints instead of butt joints that telegraph through paint.
Every fastener is set below the surface, filled and sanded flush. Joints are filled, the top edge and corners get professional caulking, and the whole run is wiped down so what you're left with is a smooth, paint-ready finish—paint-ready baseboards that a painter can coat directly without chasing gaps, ridges or nail dimples.
Because we also handle drywall finishing and interior painting, the wall above the baseboard and the trim itself are finished to the same standard—no bulging corner bead forcing the base off the wall, no wavy drywall showing a shadow line behind the trim.

Old baseboard rarely fails on its own—it's usually a symptom of something else in the room changing. These are the situations where Portland homeowners call a baseboard installer near them.
Swollen, delaminated or stained baseboard from a leak, appliance failure or wet basement—removed, the wall behind checked and repaired, new trim installed and caulked.
Kitchen, bath and whole-room remodels almost always end in new base. We fit around new cabinetry, tile and built-ins with clean returns.
New LVP, hardwood or tile changes the floor height. Baseboard is pulled, re-set or replaced so there's no gap line and no shoe-molding band-aid.
Swapping short builder-grade base for taller modern profiles is one of the highest-impact, lowest-cost upgrades in a house.
Dented, split, pet-chewed or paint-caked baseboard replaced piece-by-piece or run-by-run to match the rest of the home.
After drywall repair or texture work, base is re-installed and caulked so the wall-to-floor line finishes as cleanly as the wall itself.
When the wall behind the trim is compromised, we fix that first—see our water damage drywall repair and drywall repair services. One contractor, one schedule, one finished result.
Coped inside corners, precise miter cuts at outside corners and scribed cuts on out-of-level floors—the details that separate finish carpentry from trim slapped on a wall.
Floors protected, cuts made outside or with dust control, nail holes filled and sanded, and the room vacuumed before we leave.
Every joint filled, every gap caulked, every surface left paint-ready so the finish coat lays flat with no shadowed seams.
Aesthetic Construction is a licensed Oregon contractor (CCB #252320), bonded and fully insured on every baseboard and trim installation.
Clear scheduling, straight answers and a real person who returns your call—before, during and after the project.
Free, no-obligation on-site estimates for baseboard installation and replacement anywhere in the Portland metro.
Base fit tight to new cabinet toe kicks, islands and appliance bays with clean returns and matched profiles.
Moisture-conscious material choices and caulking around tile, vanities and tubs in Portland bathrooms.
Consistent trim installation Portland-wide across every room, hallway and stair landing in one coordinated pass.
New baseboards over freshly finished drywall, with material selected for below-grade humidity.
Production-speed baseboard installation for builders, with straight runs and consistent reveal heights.
Single-room refreshes, rental turnovers and trim upgrades handled with the same finish carpentry standard.

Baseboards are the last line of a remodel. If your ceiling still needs work, see ceiling repair; if you're starting from studs, see drywall installation and smooth finish.
We install and replace baseboards throughout Portland, Beaverton, Tigard, Lake Oswego, Tualatin, Sherwood, Wilsonville, Hillsboro, Oregon City, Happy Valley, West Linn and Clackamas—for homeowners, property managers and general contractors alike.
Residential and commercial drywall hanging for new construction and remodels.
Learn moreHole, crack and impact damage repaired and re-textured before trim goes back on.
Learn moreTaping, mudding and Level 4 / Level 5 finishing for paint-ready walls.
Learn moreLevel 5 smooth wall finishes that pair perfectly with modern square baseboards.
Learn moreWalls, ceilings, trim and baseboards painted with premium enamel systems.
Learn moreLeak and flood damage repaired behind the baseboard, not just in front of it.
Learn moreCeiling cracks, sags and stains repaired and texture-matched.
Learn moreMost Portland baseboard installation projects are priced by linear foot, with the profile, material (MDF vs. wood), ceiling and base height, number of corners and whether old trim needs removal all affecting the number. A single room is typically a same-day job; a whole home is priced as one package. We provide a free written estimate after a quick walkthrough or a set of photos.
Yes. We install MDF baseboards, factory-primed profiles and solid wood baseboards. MDF is the usual choice for painted trim because it stays straight and finishes perfectly smooth; wood is the choice for stain-grade work and historic Portland homes.
Yes—baseboard replacement in Portland is a large part of what we do. Water-damaged, swollen, split, dented or heavily painted trim can be removed and replaced room-by-room or throughout the house, including repairing the drywall behind it when needed.
In almost every case, yes. Installing base after the finished floor lets us hold a correct reveal and avoids the gap you get when flooring goes in later. If your flooring is already installed, we scribe to it so there's no shoe molding needed unless you want it.
Yes. Nail holes are filled and sanded, joints are glued and filled, and the top edge and corners are caulked to the wall so the trim reads as one continuous line. That's what makes it a true paint-ready baseboard installation.
A single room is usually a few hours. An average Portland-area home of 1,500–2,500 sq ft takes one to three days depending on removal, profile height and the number of corners. We give you a firm schedule with the estimate.
Get professional baseboard installation with clean lines, precise joints, and paint-ready finishes.