Portland Metro · Oregon
Drywall Patching in Portland, OR
Anchor holes, dings, access cuts — supported repairs, texture matching and painting.
Drywall patching is the everyday cleanup work: rows of anchor holes from a picture wall, cabinet-removal damage, plumber and electrician access cuts, or a hundred small dings from moving day. Repairs include support where needed, layered finishing, texture matching and painting.
What drywall patching really involves
We patch drywall every day — often 20+ patch points on a single walk-through before painting. The workflow is the same on every one: assess the hole or ding, add backing if needed, cut a clean replacement piece, tape and three-coat mud, match the texture on scrap board, then prime and paint.
The reason a lot of DIY or handyman patches show up later is skipped steps: no backing behind a 3" hole, mesh tape used instead of paper, mud applied thick in one pass, texture skipped, or the wall painted with a small roller that leaves a different stipple. We use paper tape, three thin coats, matched texture, and the same roller nap on the whole wall so the patch blends.
Patching is the scope we're most often called for on rental turnovers, real-estate listing prep, and post-remodel punch lists. We work fast without cutting the finishing, texture matching and painting steps.
What we cover under drywall patching
Anchor and screw hole patching
Rows of picture-hanger, shelf and TV-mount holes filled with backing and matched texture.
Doorknob and impact dings
Small round holes patched with California patch or backed rectangle depending on size.
Access cut patches
Plumber and electrician rectangular cuts patched, textured and painted.
Cabinet and molding removal patches
Wall damage after old cabinets or trim come off — patched and refinished for paint or new install.
Punch-list patches
Post-remodel punch-list repairs from GCs or after your own DIY project.
Rental turnover patching
Full unit patch-and-paint on move-out — priced per unit or per unit type.
Our process
The same repeatable process on every drywall patching job — no surprises, no hand-offs.
- 01
Walk the wall
Every ding, hole and crack numbered so nothing gets missed.
- 02
Backing where needed
Any patch over about 2" gets wood or clip backing so it's not just tape and mud.
- 03
Clean cut and fit
Patch pieces cut to fit tight — no crescent-shaped gaps.
- 04
Paper tape + three coats
Tape, fill and skim — sanded between each so the surface is flat.
- 05
Texture match
Knockdown, orange peel, hand or smooth matched on scrap first.
- 06
Prime and paint
Primer over new mud, then feathered or full-wall painting selected for the surface and lighting.
Why choose Aesthetic Construction
Rental patch-and-paint is a huge part of what we do across Portland proper, SE Portland, Beaverton and Hillsboro. Real-estate listing prep runs heavy in Lake Oswego, West Linn and Bethany. Post-remodel punch lists come in from every corner of the metro.
- Paper tape and three-coat mud on every patch over a fingertip.
- Backing installed behind holes larger than 2" — never floating patches.
- Texture matched in-house — knockdown, orange peel, hand or smooth.
- Same roller nap and paint sheen as the rest of the wall.
- Small-job scheduling based on scope and availability.
- Licensed, bonded, insured — Oregon CCB #252320.
What you get
- Supported patches with feathered finishing and matched texture.
- Fast turnaround for turnovers and listings.
- One coordinated visit instead of stringing repairs across weeks.
- Painted areas match sheen and stipple.
Frequently asked questions
Can you patch and paint in one visit?
For small patches we can usually complete demo, patch, first coat and texture in one visit, then a second short visit for finish sand, prime and paint. Same-day is possible for very small scopes.
How many patches do I need before it's worth calling?
There's no minimum, but small jobs have a minimum service charge. If you have 5–10 patches, we can often bundle them into a half-day visit.
Do you patch for rental turnovers?
Yes — flat-rate turnover patch-and-paint pricing per unit or unit type. We work with property managers across the metro.
How much does drywall patching cost in Portland?
Small patch visits typically start around $350–$550. Multi-patch and turnover jobs are priced by scope.
Will the patches be visible after paint?
We match texture and feather or repaint the wall to blend repairs; lighting, existing texture and paint affect the final appearance.
Do you work with property managers?
Property managers can send residential repair locations and scope for review. Small commercial work is subject to the area and height limits and individual project review.
Do you patch textured walls?
Yes — knockdown, orange peel, hand texture and smooth are all matched in-house.
How fast can you get out for patching?
Small patch jobs usually schedule within one to two weeks. Rental turnovers we can often prioritize.
Related services
Drywall Hole Repair
Doorknob dings, furniture impacts and fist-sized holes — supported patches, texture matching and painting.
View detailsDrywall Crack Repair
Settlement, stress and corner cracks — reinforced, taped and refinished.
View detailsDrywall Texture Repair
Knockdown, orange peel, hand and smooth — texture matching for repaired walls and ceilings.
View detailsFor Builders & General Contractors
Drywall subcontracting for new construction and small commercial projects
Hanging, taping, mudding, Level 4 and Level 5 finishing, texture and interior painting — with reliable scheduling, professional communication and clean jobsites. Licensed, bonded and insured · Oregon CCB #252320.
COI and W-9 available on request.
Request a free drywall patching estimate
Written, itemized and no obligation. We respond to estimate inquiries received during business hours the same business day. Written-estimate timing depends on project scope and any required assessment.
Oregon CCB #252320. Fully insured on every project. Certificates on request.
Available across the Portland metro
Drywall Patching is available in every city we serve.